New and more simple way to SLIPS
From an environmental perspective, slippery liquid-infused porous surface (SLIPS) have great potential to substitute for traditional antifouling coatings due to their green and broad-spectrum antifouling properties. However, the complicated strategy so far curbs its forward application.
In a new study, the superhydrophobic surfaces (SHS) was constructed by an air spraying method via solution blending, with epoxy resin and hydroxyl-terminated polydimethylsiloxane as the matrix and nano titanium dioxide particles as the filler. Then, silicone oil with different viscosities were infused into the SHS to form SLIPS. Experiments of simulated fluid erosion in a marine environment showed that silicone oil with 500 mPa·s maintained a contact angle hysteresis (CAH) of 6.9° with good liquid-repellency performance after 12 h of scouring，while the silicone oil with lower viscosity loosed the liquid-repellency performance.
Efficient coating preparation method
Antifouling test results showed that SLIPS had excellent antifouling performance, and the antifouling rates against Phaeodactylum tricornutum and Bacillus sp. were 90.8 % and 93.6 %, respectively. Thermodynamic analysis showed that the air layer of SHS coating and the liquid layer of SLIPS played a vital role in antifouling performance, which coincided with antifouling experimental results. According to the researchers, the efficient and environment-friendly coating preparation method used in their study will provide reference value and theoretical basis for the application of SLIPS in the field of marine antifouling.
The study has been published in Progress in Organic Coatings, Volume 177, April 2023.
