Numerical and experimental investigation on formation of the film for different die lip configurations in lithium-ion battery electrode slot-die coating
A recent research proves that a smaller coating gap that controls the upstream meniscus between the upstream die edge and the slot exit is beneficial to coating consistency and helps to reduce edge defect formation.
The slot-die coating is the most commonly used manufacturing method for producing lithium-ion battery electrodes. However, how to achieve high surface consistency for electrodes still confronts one challenge. In this research, the slot coating processes with different die lip configurations were carefully investigated using numerical and experimental methods. The motion pattern, internal flow structure of the coating bead, and coating uniformity were explored during the coating process of lithium battery cathode slurry. The low-flow limit at different coating gaps was also determined by combining the viscous capillary model and numerical methods, which was in good agreement with experimental results.
The results showed that a smaller coating gap controlling the upstream meniscus between the upstream die lip and slot exit was favorable to the coating uniformity. For the same thickness films, a larger coating gap was apt to increase formation of edge defects. However, the coating speed had little effect on the edge height. The evolution of flow structure for the coating bead (parabolic–sharp angle–diagonal) under different processes was investigated by tracking the particle trajectories during the coating process. It can provide theoretical guidance for the fabrication of high-quality electrodes.
Event tip: EC Conference Functional Coatings & Nanotechnology
Discover the future of coating technology! Will functional coatings help us achieve our climate goals? How do nanoscale materials change coating properties? Find out from leading experts at the EC Conference Functional Coatings & Nanotechnology, taking place on April 9th – 10th, 2024 in Cologne. Register now and be part of the discussion on the latest trends and breakthroughs.
If you are interested in more information about the recent research that proves a smaller coating gap, controlling the upstream meniscus between the upstream die edge and the slot exit, is beneficial to coating consistency and helps to reduce edge defect formation, the research has been published in Journal of Coatings Technology and Research, Volume 21, Issue 1, 03 January 2024.
